
Please firstly consult the technical data sheet and MGMS movies to understand if MGMS is suitable for your needs.
For further technical details, please contact us.
MGMS can be mounted onto a 4x4 or 6x6 vehicle with a 4 ton payload capacity.
It is possible to customise any element of HGMS, subject to consultation.
FAUN advise that MGMS requires ground conditions to have a minimum California Bearing Ratio (CBR) of 5%. MGMS can be deployed using the FASTRACK to create a roadway or the BEACH DISPENSER attachment to JCB to create a beach landing area.
If the ground conditions are not consistent, TRACKWAY will just tilt slightly, but there is no risk of vehicles tipping over.
No, it will not. After a convoy of the trucks has been passed, it may be necessary to re-align the TRACKWAY by adjusting some of the anchorage pickets.
Tensile strength of 340 MPa
Shear strength of 210 MPa
Yes, but the overall weight of the tracked vehicle can be up to 30 ton, and be no more than 3.35m in width. Rubber matting should be used to prolong the life of the TRACKWAY.
FAUN MV Ltd has been awarded ISO 9001:2000 for its quality management system in relation to the design and manufacture of temporary roadway systems and other similar ancillary military products, including after sales support.
Certificates are available upon request.

FAUN MV Ltd has been awarded ISO 14001:2004 for its environmental management system in relation to the design and manufacture of temporary roadway systems and other similar ancillary military products, including after sales support.
Certificates are available upon request.

A proven and successful framework for business improvement, the Investors in People award stimulates and challenges organisations to focus on the needs of the people to achieve its objectives. FAUN MV Ltd is a certified Investor in People, and therefore has training, development and innovative people practices at the heart of everything it does.
Certificates are available upon request.
![]()
This is largely dependent upon the size of the contract, therefore please contact us to discuss your requirements further. A guideline time would be approximately 18 weeks from receipt of purchase order to completion of manufacture.
Maximum: +40 °C / 104 °F
Minimum: -40 °C / -40 °F
Yes, there is a split in the TRACKWAY every five meters, so custom lengths can be created by hand.